Genealogy Manager :: Preferences :: Dual Genealogy

 

 

Content Sensitive Help - Click to get help on specific area.

 

Genealogy frontend - Set default genealogy structure. This will let the system know which genealogy structure to place Users when they activate an account.

 

Default User - Enter the User ID of the default sponsor . If a User activates an account from a non-referral website the system will automatically place the new User frontline of the default User.

 

 

What is a Forced Matrix Compensation Plan?

 

A Matrix is a pre-defined width (first level) and depth (down level) structure. When a User fills a pre-defined Matrix (3 x 5 - Three frontline personal sales rep and 5 level deep.), with each Matrix the User fills they are forced to start a new Matrix further in the downline levels.

 

Configure a Forced Matrix Structure

 

Enable genealogy - Setting to YES will enable this genealogy structure. Setting to NO disables Forced Matrix structure.

 

Genealogy name - Enter a nickname for this genealogy structure.

 

Enable compression - Setting to YES empty position caused by a removed user will be filled. Setting to NO empty position will remain and compression will not occur.

 

 

Company sponsored - Setting to YES will put orphans (Visitors who activate an account without being referred by another User.) directly on the company first level. Setting to NO will force orphans to be assigned to the pre-defined default User.

 

 

Show upline - Setting to ALL will show the User all their upline . Setting to IMMEDIATELY will show only the direct upline (the person who referred them).

 

 

Re-build genealogy - Setting SOURCE will re-build the genealogy structure based on original referral sequence. Setting to NON-SOURCE will retain any manually modified genealogy structure.

 

:: Genealogy Network Structure

 

Level width - Enter the width limit of the Matrix. e.g. 2 width

 

Level depth - Enter the depth limit of the Matrix. e.g. 3 depth

 

Example: 2 x 3 Matrix Phase

 

 

:: Matrix Recycling

 

Enable recycling - When enabled (Set to YES) User may start a new Matrix Phase . When a phase is filled new personal referral is placed directly on User first level thus starting a new phase . Setting to NO disable new phase creation. When a phase become filled new personal referrals will be place in the Matrix somewhere in the downline .

 

 

Phase - Set the limit of phase a User can have.

 

Enable auto recycling - Setting to YES will automatically start a new phase when a Matrix phase is filled.  If set to NO User bares the responsibility to start a new phase upon filling a phase . NOTE: If you wish to charge User to start a new phase this must be set to NO.

 

 

What is a Uni-Level Compensation Plan?

 

A Uni-level is an undefined structure with unlimited width (first level) and depth (down levels).

 

Configure Uni-Level Structure

 

Enable genealogy - Setting to YES will enable this genealogy structure. Setting to NO disables Forced Matrix structure.

 

Genealogy name - Enter a nickname for this genealogy structure.

 

Enable compression - Setting to YES empty position caused by a removed user will be filled. Setting to NO empty position will remain and compression will not occur.

 

 

Show upline - Setting to ALL will show the User all their upline . Setting to IMMEDIATELY will show only the direct upline (the person who referred them).

 

 

Re-build genealogy - Setting SOURCE original referral record. Setting to NON-SOURCE will retain any modified genealogy .

 

:: Genealogy Network Structure

 

Level width - Unlimited

 

Level depth - Enter the depth limit of the Uni-Level . e.g. 7

 

Example: Unlimited Width & 7 Levels in Depth

 

 

 

 

What is an Australian X-Up Program?

 

Pass up option. Activate this program to force New User to pass their initial referred User(s) to their upline sponsor (The person who referred them).

 

Configuring the X-Up Program

 

Enable - Setting to YES will activate the X-Up program. Setting to NO disables the program.

 

Qualify by sales -  Setting to YES will pass up only User(s) who have made a sale. Example: If User1 sponsors User2, User3, User4, and User5. Two weeks passes and User4 makes a sales, then User4 is pass up to the sponsor to fill User1 pass-up qualifications defined in the Qualifying users setting below. Setting to NO will disable this option. NOTE: This feature is only available when the Financial and Plan Module is installed.

 

 

Qualifying users - Enter the number of Users that is required to be passed up.

 

Pass up option - Enter the sequence number of the Users how are passed up. Example: 1,4 means the first and forth referred User is passed up to the sponsor . Remember; if Qualify by sales is enabled it will pass up the first and forth User who made a sale.

 

 

Click Submit ::. button to save changes.